Description
A gentle electric radiant heat system designed specifically for dry installation under floating wood and laminate floors. A low profile, line voltage system, it features gradual warmth from low wattage resistance heating of ultra-thin, flexible radiant heat film. Installed easily over a subfloor or over an acoustic/insulating underlayment as part of the overall floor assembly, it uses just 12 watts per square foot to gently raise the temperature of the floor, conforming to the warranty requirements of many floating floors. The system, which sports an impressive 99% efficiency, includes temperature limiting properties so the film does not overheat. Its available in four convenient rollout mat sizes that will accommodate most any layout. Each mat has wires pre-attached for ease of installation.
- Use with most floating laminate, engineered wood and floating tile floors
- Uses an highly-efficient conductive ink technology
- Disperses an evenly consistent heat throughout the entire floor
- Will not add extra height to the floor, only 0.016 in. thick
- Consumes up to 50% less power than traditional wired systems
- Easy to install: roll out, cut length to fit if needed and run pre-attached wires to a wall thermostat
- No mortar and no mess
- Conforms to many floating floor manufacturers requirements
- Maintenance free, crafted to not completely shut down if the system should ever become compromised or damaged
- Adjust temperature with QuietWarmth Thermostat (Sold Separately)
Approved Flooring
- All Floating Floors
- Floating Tiles
- Laminate
- Engineered Wood
- Luxury Vinyl Flooring (4mm or thicker)
- Cork and Bamboo
* Refer to Floor Covering Manufacturer's specifications for compatibility of their product over any radiant heat before installation.
Technical Data
QuietWarmth Spec Sheet
Click Here to View
| Weight | 1.8 oz/sq.ft /55kg/m2 |
| Thickness | 0.016" |
| Watts Per Square Feet | 12W |
| Factory Attached Lead Wires | 15' lengths |
Standard Sizes for 120V
| Model # | Dimensions | Watts | Amps |
| QWARM1.5X5F120 | 1.5' X 5' | 78 | 0.651 |
| QWARM1.5X5F120 | 1.5' X 10' | 156 | 1.30 |
| QWARM1.5X5F120 | 3' X 5' | 167 | 2.73 |
| QWARM1.5X5F120 | 3' X 10' | 334 | 2.73 |
Standard Sizes for 240V
| Model # | Dimensions | Watts | Amps |
| QWARM1.5X5F240 | 1.5' X 5' | 78 | 0.33 |
| QWARM1.5X5F240 | 1.5' X 10' | 156 | 0.65 |
| QWARM1.5X5F240 | 3' X 5' | 167 | 0.70 |
| QWARM1.5XF240 | 3' X 10' | 334 | 21.30 |
Installation Instructions
Installation Instructions - Click Here to View
Limitations
- This material shall be installed only by qualified personnel who are familiar with the construction and operation of the material and the risk involved.
- Do not install QuietWarmth Floating Floor heat under carpet, glued or nailed wood floors.
- Do not install QuietWarmth Floating Floor heat in walls.
- Use 12 AWG ROMEX only as supply conductors
Additional Information
Volts: |
240 |
Flooring Type: |
Engineered Hardwood |
Flooring Type: |
Laminate Flooring |
Flooring Type: |
Floating Floors |
Flooring Type: |
LVP (4mm or thicker) |
Mortar Required: |
Not Required |
