Description
A gentle electric radiant heat system designed specifically for dry installation under floating wood and laminate floors. This 2-in-1 system allows you to cut mat in middle and use both ends of mat. Helping reduce waste with money savings! A low profile, line voltage system, it features gradual warmth from low wattage resistance heating of ultra-thin, flexible radiant heat film. Installed easily over a subfloor or over an acoustic/insulating underlayment as part of the overall floor assembly, it uses just 12-Watt per square foot to gently raise the temperature of the floor, conforming to the warranty requirements of many floating floors. The system, which sports an impressive 99% efficiency, includes temperature limiting properties so the film does not overheat. Its available in four convenient rollout mat sizes that will accommodate most any layout. Each mat has wires pre-attached for ease of installation.
- 2-in-1 system allows you to cut mat in middle and use both ends of mat. Helping reduce waste with money savings!
- Use with most floating laminate, engineered wood and floating tile floors
- Uses an highly-efficient conductive ink technology
- Disperses an evenly consistent heat throughout the entire floor
- Will not add extra height to the floor, only 0.016 in. thick
- Consumes up to 50% less power than traditional wired systems
- Easy to install roll out, cut length to fit if needed and run pre-attached wires to a wall thermostat
- No mortar and no mess
- Conforms to many floating floor manufacturers requirements
- Maintenance free, crafted to not completely shut down if the system should ever become compromised or damaged
- Adjust temperature with quiet warmth thermostat (sold separately)
Approved Flooring
- All Floating Floors
- Floating Tiles
- Laminate
- Engineered Wood
- Luxury Vinyl Flooring (4mm or thicker)
- Cork and Bamboo
* Refer to Floor Covering Manufacturer's specifications for compatibility of their product over any radiant heat before installation.
Technical Data
QuietWarmth Spec Sheet
Click Here to View
| Weight | 1.8 oz/sq.ft /55kg/m2 |
| Thickness | 0.016" |
| Watts Per Square Feet | 12W |
| Factory Attached Lead Wires | 15' lengths |
Standard Sizes for 120V
| Model # | Dimensions | Watts | Amps |
| QWARM1.5X5F120 | 1.5' X 5' | 78 | 0.651 |
| QWARM1.5X5F120 | 1.5' X 10' | 156 | 1.30 |
| QWARM1.5X5F120 | 3' X 5' | 167 | 2.73 |
| QWARM1.5X5F120 | 3' X 10' | 334 | 2.73 |
Standard Sizes for 240V
| Model # | Dimensions | Watts | Amps |
| QWARM1.5X5F240 | 1.5' X 5' | 78 | 0.33 |
| QWARM1.5X5F240 | 1.5' X 10' | 156 | 0.65 |
| QWARM1.5X5F240 | 3' X 5' | 167 | 0.70 |
| QWARM1.5XF240 | 3' X 10' | 334 | 21.30 |
Installation Instructions
Installation Instructions - Click Here to View
Limitations
- This material shall be installed only by qualified personnel who are familiar with the construction and operation of the material and the risk involved.
- Do not install QuietWarmth Floating Floor heat under carpet, glued or nailed wood floors.
- Do not install QuietWarmth Floating Floor heat in walls.
- Use 12 AWG ROMEX only as supply conductors
Additional Information
Volts: |
120 |
Total Square Footage Covered: |
48 |
Flooring Type: |
Engineered Hardwood |
Flooring Type: |
Laminate Flooring |
Flooring Type: |
Floating Floors |
Flooring Type: |
LVP (4mm or thicker) |
Mortar Required: |
Not Required |
