Roberts Engineered Wood Flooring Glue Adhesive - 4 Gallons

(1 review) Write a Review
  • Roberts 1407 Engineered Wood Flooring Glue Adhesive - Front Label
  • Roberts 1407 Engineered Wood Flooring Glue Adhesive - Back Label
  • Roberts 1407 Engineered Wood Flooring Glue Adhesive - Trowel Size Recommendation
Frequently bought together:


Roberts 1407 is an acrylic urethane adhesive designed for the installation of engineered and parquet wood flooring up to 1/2 in. thick and 5 in. wide. Roberts 1407 is a solvent free adhesive and meets the strict requirements of the South Coast Air Quality Management District and may contribute one LEED point for "Low-Emitting Material-Adhesive and Sealant" (IEQ Credit 4.1). Roberts 1407 is protected by GoldGuard, an antimicrobial protection system that inhibits the growth of mold, mildew and odor causing bacteria in both wet and dry adhesive. Additional 1407 features include the holding of trowel ridge for optimum wood contact, excellent working time, and easy soap and water clean-up.

  • For use with engineered wood planks, parquet flooring and acrylic-impregnated planks up to 1/2 in. thick and 5 in. wide
  • Solvent free, low VOC, environmentally friendly formulation
  • High-solid formula can be cleaned with warm, soapy water when the adhesive is still wet
  • Open time: up to 20 minutes, working time: up to 30 minutes, cure time: 24 to 48 hours before foot traffic and moving heavy objects
  • Solvent-free, low-odor adhesive is odorless when dry
  • Covers approximately 70-80 sq. ft. per gallon when installing pre-finished parquet when using a 1/8 in. x 1/8 in. x 1/8 in. V-notch trowel
  • Holds trowel ridge for optimum wood contact
  • Rated for heavy-traffic residential and commercial areas

Info & Guides

View AllClose

Additional Information

Base Type:
Container Size:
4 gallon (US)
Cure Time:
8 to 10 hour
Manufacturer Warranty:
10 year
Minimum Application Temperature:
65 degrees Fahrenheit
Recommended Environment:
Compatible Flooring Type:
180 - 320 square feet
Compatible Surfaces:
Plywood, Gypsum, Cork underlayment, Concrete, Terrazzo
Maximum Application Temperature:
95 degrees Fahrenheit
Product Type:
Working Time:
1/2 hour
View AllClose

Videos Hide Videos Show Videos

1 Review

  • 5
    Easy Installation and Easy Cleanup

    Posted by Clair Davis on 27th Feb 2020

    It spread very easily during installation. When I was finished it cleaned up better than other glues I've had in the past.

View AllClose